Don't panic
May 3, 09:22 PM
I notice I'm not mentioned in DP's post. :)
you notice wrong, old windbag: did your oversized hat fell on your nose again? ;)
and can we have some light please? i think there is something in the corner
I
What do the AP POINTS have to do with this game? It seems like only HP matters.
You wrote HP subtraction would be determined at random. Are you saying one person could get all the points in your example in the OP.
combined attack points determine the amount of damage inflicted to the opponent.
if more than one opponent, i think for each single hit, independently, the GMs use random.org to see where it lands. so yes, one unlucky fellow might get blasted
you notice wrong, old windbag: did your oversized hat fell on your nose again? ;)
and can we have some light please? i think there is something in the corner
I
What do the AP POINTS have to do with this game? It seems like only HP matters.
You wrote HP subtraction would be determined at random. Are you saying one person could get all the points in your example in the OP.
combined attack points determine the amount of damage inflicted to the opponent.
if more than one opponent, i think for each single hit, independently, the GMs use random.org to see where it lands. so yes, one unlucky fellow might get blasted
cube
May 6, 03:06 AM
If Macs are based on ARM they should be able to run iOS apps, ARM Windows 8, ARM Linux, etc. And I wouldn't be surprised if there would be an "x86 Rosetta".
Chupa Chupa
Apr 7, 10:54 AM
I see the short sighted Apple pom-pom shakers are once again giddy with excitement. The juvenile remarks are embarrassing.
For some strange reason you think monopolies are good for consumers.
I see the wannabe lawyers are once again shaking their fists in outrage because Apple's muti-billion dollar competitors like BB, HTC, Moto can't match wits with Apple.
For some strange reason you think monopolies are good for consumers.
I see the wannabe lawyers are once again shaking their fists in outrage because Apple's muti-billion dollar competitors like BB, HTC, Moto can't match wits with Apple.
thejadedmonkey
Aug 2, 10:50 AM
I can't wait!
5 days to go, and I'm in need of an iPod and reallllly really really wanna get a look at this 'Leapord' thing everyone's talking about so much! So maybe I don't get my iPod, I'm still really excited. Apple's been so boring this year, with a bluetooth might mouse just about the most exciting release thus far... I have expectations Apple, don't let me dont please
5 days to go, and I'm in need of an iPod and reallllly really really wanna get a look at this 'Leapord' thing everyone's talking about so much! So maybe I don't get my iPod, I'm still really excited. Apple's been so boring this year, with a bluetooth might mouse just about the most exciting release thus far... I have expectations Apple, don't let me dont please
Palad1
May 6, 04:50 AM
Windows 8 being available on ARM platforms would make this move, albeit a bold one, pretty viable.
bloodycape
Nov 22, 10:53 PM
You took the words right out of my mouth.
I remember when Napster and Rio laughed at the iPod and iTunes, and 5 years later.:rolleyes:
The ipod almost just caught up to rio in terms of audio.
I remember when Napster and Rio laughed at the iPod and iTunes, and 5 years later.:rolleyes:
The ipod almost just caught up to rio in terms of audio.
djpic
May 6, 06:49 AM
If they do that, and will no longer buy apple computers. I may keep the iPhone but no more iMacs for me. Also with this, I will seriously start conidering selling my stock. Apple has tried to use a custom processor before, and looked how that turned out. There is no way they can catch up to Intel's and AMD's experience making chips. Intel I believe are some the best and AMD is right there with them. All I could see happening is performace dropping and apple profit margins growing. I don't think this would be a smart move for apple, but what do I know, I am just a consumer.
I believe they are starting to move into the "I am big, I am selling a crap load of devices. I know what I am doing."
When they purchased ARM chip manufactures, I knew this is where they were going to be taking it. Just a matter of time.
-- Side note --
I am NOT completely against this, I just hope if they do make the move, I want to see benchmarks against Intel and AMD processors...if performance & relibility surpasses them, then I may reverse opinion....this is my intial reaction.
I believe they are starting to move into the "I am big, I am selling a crap load of devices. I know what I am doing."
When they purchased ARM chip manufactures, I knew this is where they were going to be taking it. Just a matter of time.
-- Side note --
I am NOT completely against this, I just hope if they do make the move, I want to see benchmarks against Intel and AMD processors...if performance & relibility surpasses them, then I may reverse opinion....this is my intial reaction.
shawnce
Jul 21, 07:17 PM
plus with Core 2 chips being more expensive than Yonah...
T2600 (Yonah @ 2.16GHz) currently goes for $423 (trays of 1000)
T2500 (Yonah @ 2.00GHz) currently goes for $294 (trays of 1000)
T2400 (Yonah @ 1.83GHz) currently goes for $241 (trays of 1000)
T7600 (Merom @ 2.33GHz) is reported to go for $637 (trays of 1000)
T7400 (Merom @ 2.16GHz) is reported to go for $423 (trays of 1000)
T7200 (Merom @ 2.00GHz) is reported to go for $294 (trays of 1000)
...in other words it looks like the Yonah is either being replaced whole sale or is going to see further price drops when the Merom comes out. Of course I am still not 100% convinced the reported pricing for Merom is correct.
T2600 (Yonah @ 2.16GHz) currently goes for $423 (trays of 1000)
T2500 (Yonah @ 2.00GHz) currently goes for $294 (trays of 1000)
T2400 (Yonah @ 1.83GHz) currently goes for $241 (trays of 1000)
T7600 (Merom @ 2.33GHz) is reported to go for $637 (trays of 1000)
T7400 (Merom @ 2.16GHz) is reported to go for $423 (trays of 1000)
T7200 (Merom @ 2.00GHz) is reported to go for $294 (trays of 1000)
...in other words it looks like the Yonah is either being replaced whole sale or is going to see further price drops when the Merom comes out. Of course I am still not 100% convinced the reported pricing for Merom is correct.
iMacZealot
Jul 31, 01:50 AM
That is only because CDMA had such a jump on GSM in the USA, and the GSM carriers in the USA are still smaller. Verizon also has a massive analog network that T-Mobile won't touch as their phones are GSM only.
Unfortunately, the free market approach adopted when installing networks in the USA has led to a number of problems, and while you might think Verizon service is good relative to the other US carriers, it cannot compare to the carriers in Europe who use a shared GSM network that was adopted after much deliberation. Like most of the world, we are GSM-only.
That's why I'm switching from VZW to T-Mobile!
Unfortunately, the free market approach adopted when installing networks in the USA has led to a number of problems, and while you might think Verizon service is good relative to the other US carriers, it cannot compare to the carriers in Europe who use a shared GSM network that was adopted after much deliberation. Like most of the world, we are GSM-only.
That's why I'm switching from VZW to T-Mobile!
jace88
Jan 12, 05:56 AM
Ouch that sounds bad but good thing I don't use Time Machine. I'm thinking of downloading/installing this on my MBA! Reviews on the net (e.g. CNET) make it sound quite good.
Don't panic
May 5, 03:26 PM
slow day today. i was hoping we could get a couple of rounds in.
BenRoethig
Sep 15, 04:45 PM
Please don't mess with the keyboard. The Macbook keyboard wouldn't suit the Macbook Pro.
The Macbook keyboard doesn't fit the macbook. I'm sure people with large hands love it, but those of us with smaller hands really have to reach.
The Macbook keyboard doesn't fit the macbook. I'm sure people with large hands love it, but those of us with smaller hands really have to reach.
Amazing Iceman
Apr 25, 10:08 AM
Hilarious that the email sender said a DROID won't track him...hahahah so funny... as if a "GOOGLE" phone doesn't track their Android user's every move... This isn't really a iPhone matter, its a matter of all smartphones, with maybe a little exception for blackberry's. It's really nothing new... Google even has a stored database for random screen-caps it takes on all its Android users at any time.
Android, WinMo, Symbian, WebOS, etc. openness makes them the most vulnerable, easiest targets of all.
The iPhone is more secure in this sense, as it's locked. Not impossible to break, but at least difficult.
We would need to go back to the days of the old flip-phone with no application capabilities: no symbian, no java, nothing!
Android, WinMo, Symbian, WebOS, etc. openness makes them the most vulnerable, easiest targets of all.
The iPhone is more secure in this sense, as it's locked. Not impossible to break, but at least difficult.
We would need to go back to the days of the old flip-phone with no application capabilities: no symbian, no java, nothing!
Yamcha
Apr 25, 09:22 AM
I think Steve is outright lying about this.. I don't think most people aren't fond of this, including myself..
radiohead14
Mar 30, 03:11 PM
just signed up. the whole process is actually really easy. i was up and running within seconds. i've been buying all my music from amazon for years now, and having the convenience of your digital music automatically sync'd up to your personal locker is great. it even scanned my 104GB music collection within 2 mins! pretty cool
okboy
Apr 23, 06:18 PM
Bogus story because Apple would never fit graphics cards capable of outputting at that res in the iMacs or laptops. Plus I don't think any single monitor can have that resolution that you can buy today?
They currently do... even the Airs can do 1440x700 plus a 2560x1440 Cinema Display. And the 15" MBP and up and all the iMacs have pretty good video cards. You're wrong.
Retina Cinema in Summer?
I'm hoping for a new Cinema too, but the DPI on them is as high as it's ever going to get, IMO. There's no need for a higher pixel density on a screen that you see from that distance. The screens in them are already very dense. They're equivalent to the Dell Ultra Sharp, which are over $1000.
The resolution will not be updated, but hopefully the Cinemas will get dual Thunderbolt ports and maybe USB 3.0 and audio through Thunderbolt.
They currently do... even the Airs can do 1440x700 plus a 2560x1440 Cinema Display. And the 15" MBP and up and all the iMacs have pretty good video cards. You're wrong.
Retina Cinema in Summer?
I'm hoping for a new Cinema too, but the DPI on them is as high as it's ever going to get, IMO. There's no need for a higher pixel density on a screen that you see from that distance. The screens in them are already very dense. They're equivalent to the Dell Ultra Sharp, which are over $1000.
The resolution will not be updated, but hopefully the Cinemas will get dual Thunderbolt ports and maybe USB 3.0 and audio through Thunderbolt.
lamina
Nov 22, 11:04 AM
If Apple came out with a PDA, I would buy it in a split second. I am in the market for a PDA, but I don't like the feel of the Windows OS or whatever is on them.
I would want it to be slightly wider than the current 5th gen iPod, with the same height, and all virtual controls.
Come to think of it, why not just make a full screen iPod with PDA capabilities, especially bluetooth. Bluetooth wouldn't be too useful for song transfers (isn't it limited to 1 megabit/s?) but for calendar files and contacts, even pictures, it would be perfect.
Ohh Apple please come out with a PDA. I don't even want the cell phone feature.
I would want it to be slightly wider than the current 5th gen iPod, with the same height, and all virtual controls.
Come to think of it, why not just make a full screen iPod with PDA capabilities, especially bluetooth. Bluetooth wouldn't be too useful for song transfers (isn't it limited to 1 megabit/s?) but for calendar files and contacts, even pictures, it would be perfect.
Ohh Apple please come out with a PDA. I don't even want the cell phone feature.
ChazUK
Apr 18, 03:35 PM
I'm reading that this includes the Nexus S (which has no samsung touchwiz "optimisations" at all).
Why doesn't Apple simply go for the jugular and hit Google with an Android lawsuit?
Why doesn't Apple simply go for the jugular and hit Google with an Android lawsuit?
bella92108
Apr 5, 02:21 PM
Yes they can. There is no protection under law for making money off the ineptitude of other companies. Apple is entitled, and expected to fix bugs. When those bugs get fixed, an avenue for jail breaking gets closed. Companies that see their revenue stream dry up are just screwed. That's life.
Jail breaking happens because Apple screwed the pooch on security. That's all.
Much of it is the automatic association that "jailbreak = pirated apps" which for many of us is not the case. I have spent $52 on apps in the last 3 weeks of having iPad... they're making a killing off me. Even with all of the apps I have, I can't stand looking at the device's home screen with an inch of space between each app, and it drives me nuts that I am limited to how many icons i can put in each folder. IF I can't jailbreak this thing in the next week, it's going back to the store, and I'll buy the Xoom. It solves all the issues. Would rather stay with Apple because the hardware is so much better than android, but I have to be realistic, software is what makes any device (hence why I like my Mac so much)
Jail breaking happens because Apple screwed the pooch on security. That's all.
Much of it is the automatic association that "jailbreak = pirated apps" which for many of us is not the case. I have spent $52 on apps in the last 3 weeks of having iPad... they're making a killing off me. Even with all of the apps I have, I can't stand looking at the device's home screen with an inch of space between each app, and it drives me nuts that I am limited to how many icons i can put in each folder. IF I can't jailbreak this thing in the next week, it's going back to the store, and I'll buy the Xoom. It solves all the issues. Would rather stay with Apple because the hardware is so much better than android, but I have to be realistic, software is what makes any device (hence why I like my Mac so much)
CalBoy
May 3, 03:39 PM
I see no reason why 99, 99.5, and 100 are easier to track than 37.2, 37.5, and 37.7. As you said, we accept body temp to be 98.6 and 37.0 in Celsius. If decimals are difficult to remember, then clearly we should pick the scale that represents normal body temp as an integer, right? ;)
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
It doesn't matter what normal body temperature is because that's not what people are looking for when they take a temperature; they're looking for what's not normal. If it can be helped, the number one is seeking should be as flat as possible.
There is a distinctive quality about 100 that is special. It represents an additional place value and is a line of demarcation for most people. For a scientist or professional, the numbers seem the same (each with 3 digits ending in the tenths place), but to the lay user they are very different. The average person doesn't know what significant digits are or when rounding is appropriate. It's far more likely that someone will falsely remember "37.2" as "37" than they will "99" as "98.6." Even if they do make an error and think of 98.6 as 99, it is an error on the side of caution (because presumably they will take their child to the doctor or at least call in).
I realize this makes me seem like I put people in low regard, but the fact is that most things designed for common use are meant to be idiot-proof. Redundancies and warnings are hard to miss in such designs, and on a temperature scale, one that makes 100 "dangerous" is very practical and effective. You have to keep in mind that this scale is going to be used by the illiterate, functionally illiterate, the negligent, the careless, the sloppy, and the hurried.
The importance of additional digits finds its way into many facets of life, including advertising and pricing. It essentially the only reason why everything is sold at intervals of "xx.99" instead of a flat price point. Marketers have long determined that if they were to round up to the nearest whole number, it would make the price seem disproportionately larger. The same "trick" is being used by the Fahrenheit scale; the presence of the additional digit makes people more alarmed at the appropriate time.
Perhaps your set of measuring cups is the additional piece of equipment. Indeed you wouldn't need them. For a recipe in SI, the only items you would need are an electronic balance, graduating measuring "cup," and a graduated cylinder. No series of cups or spoons required (although, they do of course come in metric for those so inclined).
Of course any amateur baker has at least a few cups of both wet and dry so they can keep ingredients separated but measured when they need to be added in a precise order. It just isn't practical to bake with 3 measuring devices and a scale (which, let's be real here, would cost 5 times as much as a set of measuring cups).
This also relies on having recipes with written weights as opposed to volumes. It would also be problematic because you'd make people relearn common measurements for the metric beaker because they couldn't have their cups (ie I know 1 egg is half a cup, so it's easy to put half an egg in a recipe-I would have to do milimeter devision to figure this out for a metric recipe even though there's a perfectly good standard device for it).
It might seem that way to you, but the majority of the world uses weight to measure dry ingredients. For them it's just as easy.
Sure when you have a commercial quantity (which is also how companies bake in bulk-by weight), but not when you're making a dozen muffins or cupcakes. The smaller the quantity, the worse off you are with weighing each ingredient in terms of efficiency.
Why would you need alternative names? A recipe would call for "30ml" of any given liquid. There's no need to call it anything else.
So what would you call 500ml of beer at a bar? Would everyone refer to the spoon at the dinner table as "the 30?" The naming convention isn't going to disappear just because measurements are given in metric. Or are you saying that the naming convention should disappear and numbers used exclusively in their stead?
Well, no one would ask for a 237ml vessel because that's an arbitrary number based on a different system of units. But if you wanted, yes, you could measure that amount in a graduated measuring cup (or weigh it on your balance).
In that case, what would I call 1 cup of a drink? Even if it is made flat at 200, 250, or 300ml, what would be the name? I think by and large it would still be called a cup. In that case you aren't really accomplishing much because people are going to refer to it as they will and the metric quantity wouldn't really do anything because it's not something that people usually divide or multiply by 10 very often in daily life.
I suspect people would call it a "quarter liter," much like I would say "quarter gallon."
No, that would be 1/4 of a liter, not 4 liters. I'm assuming that without gallons, the most closely analogous metric quantity would be 4 liters. What would be the marketing term for this? The shorthand name that would allow people to express a quantity without referring to another number?
And no, you wouldn't call 500ml a "pint" because, well, why would you? :confused:
Well I'm assuming that beer would have to be served in metric quantities, and a pint is known the world over as a beer. You can't really expect the name to go out of use just because the quantity has changed by a factor of about 25ml.
...But countries using SI do call 500ml a demi-liter ("demi" meaning "half").
Somehow I don't see that becoming popular pub lingo...
This is the case with Si units as well. 500, 250, 125, 75, etc. Though SI units can also be divided by any number you wish. Want to make 1/5 of the recipe? ...Just divide all the numbers by five.
Except you can't divide the servings people usually take for themselves very easily by 2, 4, 8, or 16. An eighth of 300ml (a hypothetical metric cup), for example, is a decimal. It's not very probable that if someone was to describe how much cream they added to their coffee they'd describe it as "37.5ml." It's more likely that they'll say "1/4 of x" or "2 of y." This is how the standard system was born; people took everyday quantities (often times as random as fists, feet, and gulps) and over time standardized them.
Every standard unit conforms to a value we are likely to see to this day (a man's foot is still about 12 inches, a tablespoon is about one bite, etc). Granted it's not scientific, but it's not meant to be. It's meant to be practical to describe everyday units, much like "lion" is not the full scientific name for panthera leo. One naming scheme makes sense for one application and another makes sense for a very different application. I whole heartedly agree that for scientific, industrial, and official uses metric is the way to go, but it is not the way to go for lay people. People are not scientists. They should use the measuring schemes that are practical for the things in their lives.
Not that OS X Panthera Leo doesn't have a nice ring to it, of course. ;)
No, but it is onerous for kids to learn SI units, which is a mandatory skill in this global world. Like I said, why teach kids two units of measure if one will suffice?
It's onerous to learn how to multiply and divide by 10 + 3 root words? :confused: Besides, so many things in our daily lives have both unit scales. My ruler has inches and cm and mm. Bathroom scales have pounds and kg. Even measuring cups have ml written on them.
You could be right for international commerce where values have to be recalculated just for the US, but like I said, I think those things should be converted. I don't really care if I buy a 25 gram candy bar as opposed to a 1 ounce candy bar or a 350ml can of soda.
Perhaps true, but just because you switch to metric, doesn't mean you need to stop using tablespoons and teaspoons for measurements. It's all an approximation anyway, since there are far more than 2 different spoon sizes, and many of them look like they're pretty much equal in size to a tablespoon.
I'm sorry, but which tablespoons do you use that aren't tablespoons? The measuring spoons most people have at home for baking are very precise and have the fractions clearly marked on them.
Other than that, there's a teaspoon, tablespoon, and serving spoon (which you wouldn't use as a measurement). The sizes are very different for each of those and I don't think anyone who saw them side by side could confuse them.
So if you're cooking, do what everyone else does with their spoons; if you need a tablespoon, grab the big-ish one and estimate. If you needed more precision than that, why wouldn't you use ml? :confused:
Because it's a heck of a lot easier to think, "I need one xspoon of secret ingredient" than it is to think, "I need xml of secret ingredient." You think like a scientist (because you are one). Most people aren't. That's who the teaspoons and tablespoons are for.
BRLawyer
Nov 26, 01:47 PM
Simple...it's NOT gonna happen anytime soon.
The Tablet market is a sad failure, as it represents a tech in search of a purpose...nobody needs or wants it.
Hint? Think Origami, one among too many MS failures...just like the Zune in the next months.
Apple will NOT enter the fabled Tablet market again, as the focus of demand is on notebooks, nothing else...yet another borndead rumor.
The Tablet market is a sad failure, as it represents a tech in search of a purpose...nobody needs or wants it.
Hint? Think Origami, one among too many MS failures...just like the Zune in the next months.
Apple will NOT enter the fabled Tablet market again, as the focus of demand is on notebooks, nothing else...yet another borndead rumor.
dr_lha
Aug 11, 10:51 AM
You can drop in Merom into the current socketed Yonah lines. That is what I was getting at. I know that the link (http://www.microdirect.co.uk/ProductInfo.aspx?ProductID=14564&GroupID=1674) that was posted was to a Conroe chip though.
I was responding to a link to a Conroe chip. Hence why I said that there is no Mac that the *linked Conroe* chip can be put into *apart from maybe the Mac Pro* which has the right socket.
Again, you're just reading my post incorrectly.
I was responding to a link to a Conroe chip. Hence why I said that there is no Mac that the *linked Conroe* chip can be put into *apart from maybe the Mac Pro* which has the right socket.
Again, you're just reading my post incorrectly.
progx
Mar 30, 06:16 AM
Hmm. This seems like a pass for me. I'll wait for Apple's offerings through MobileMe this year because I'll have the iPhone 4 or 5 on Verizon by the end of the year.
Then I can punt my piece of s*** Droid X to the curb. No more battery pulls and video that'll play NATIVELY ON THE DEVICE THAT RECORDED IT! Yes, the Droid X can't play it's own video back. Motorola's Droids Don't Do JACK.
Amazon's new service will be good, but just like its video streaming options, just a little too expensive. I'm sure it will be a great service for the Droids and the price will eventually go down. Maybe they should look into a data farm.
Then I can punt my piece of s*** Droid X to the curb. No more battery pulls and video that'll play NATIVELY ON THE DEVICE THAT RECORDED IT! Yes, the Droid X can't play it's own video back. Motorola's Droids Don't Do JACK.
Amazon's new service will be good, but just like its video streaming options, just a little too expensive. I'm sure it will be a great service for the Droids and the price will eventually go down. Maybe they should look into a data farm.
Nuvi
Nov 8, 10:12 AM
I was at a local apple store and they are selling the tom tom car kit already. What a rip off, because you have to pay for the app seperate. I got the griffin car mount for $20 at frys and the navigon app, works great.
If you have to pay the suggested retail price then I do admit its a rip off. However, you can get easily 20% off if you just shop around a little bit. Regarding the TomTom app I fully agree. I actually think its way bigger rip off then the dock.
If you have to pay the suggested retail price then I do admit its a rip off. However, you can get easily 20% off if you just shop around a little bit. Regarding the TomTom app I fully agree. I actually think its way bigger rip off then the dock.
No hay comentarios:
Publicar un comentario